Vestil ALUMINUM TRUCK DOCKBOARD 8000 LBS 78X72
Status: Available
Lead Time to Ship for Qty of 1 = 23 Business Days
Priced Per: EACH
SKU:
BTA-08007872
$4,066.95
100% aluminum construction provides rugged long lasting use
Raised-diamond treadplate dockboard surface complies with OSHA
Welded aluminum locking legs underneath dockboard to comply with OSHA
Beveled entry and exit edges provide a smooth transition
Sold Seperately for: HDL, SP, RPL-ALUM, HOLE, SBL, S2B, ATC-12, LC72-84, PIN, ALL, HDL-BTA-1314, WH-BTA-1314, WHHDL-BTA-1314
Raised-diamond treadplate dockboard surface complies with OSHA
Welded aluminum locking legs underneath dockboard to comply with OSHA
Beveled entry and exit edges provide a smooth transition
Sold Seperately for: HDL, SP, RPL-ALUM, HOLE, SBL, S2B, ATC-12, LC72-84, PIN, ALL, HDL-BTA-1314, WH-BTA-1314, WHHDL-BTA-1314
The Aluminum Truck Dockboard is engineered and built to maximize safety while handling heavy fork trucks and loads. The beveled edge is designed for smooth entry and exit. Locking legs prevent movement during loading and unloading operations. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. When using three-wheeled fork trucks order dockboard with capacity at least four-times the lifting capacity of fork truck. The width of the dockboard should be at least 15 (in.) wider than the load or equipment passing between the curbs. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.
| Weight | 214.0 |
|---|---|
| Width (in.) | 78 |
| Length (in.) | 72 |
| Height (in.) | 16.75 |
| Uniform Capacity (lb.) | 8000 |
| Height Difference (in.): 8 degree/17 percent | 8-1/2 |
| Height Difference (in.): 11 degrees/19 percent | 12 |
| Bend Degree | 11 |
| Bend Distance from Edge (in.) | 9 |
| Leg Distance from Edge (in.) | 12 |
| Usable Width (in.) | 73-1/2 |
| Usable Length (in.) | 72 |
| Edge Type | Beveled |
| Equipped With | Welded Aluminum Locking Legs |
| Surface Type | Raised-Diamond Treadplate |
| Plate Thickness (in.) | 1/2 |
| Curb Height (in.) | 2-3/4 |
| Curb Width (in.) | 2-1/4 |
| OSHA | 1910.30 (a) |
| ANSI | MH 30.2 |
Write Your Own Review
