Telescopic boom lift is a useful tool for forklifts in lifting heavy loads on a higher level. It is securely attached on the forklift forks. Telescopic work boom lift is used in mechanic and hydraulic operations. Here are some few tips on how you can attach a telescopic boom lifts on the forklift. Anyone operating the telescopic booms lifts should be knowledgeable on how o do this.
You need to install the boom into the forks of the forklift. Position the forklifts into the boom’s pocket. Then place the forks on the pocket with its back on the fork carriage. Fasten carefully the safety chain on the fork carriage by pulling it tight. You need to check if it is tight enough to avoid loosening especially the locking hook. Shifting the carriage back in the boom must is also important. In order to adjust the length of the boom, you need to remove the locking pin on the inner part on the telescoping tube. If replacement requires on the locking pin, consider replacing for safety purposes.
It is advisable to review the manual of the forklift as to its capacity and desirable high limit. Any damage on the booms should be changed. Also remember that when trying to lift the boom with the load you must slant the mast must towards your location. This is to avoid falling down of the fork. Forklift accessory such as telescopic booms lift is very important in materials handling. You can also visit Forklift Accessories.